Semi Synthetic Oils (Sharp-3000)  pdf

Product Description

Sharp 3000 is a semi synthetic cutting oil with excellent anti corrosion properties, extreme lubrication, extended sump life, longer tool life & extreme pressure performance for heavy duty applications. The emulsion formed provides superb lubricity and cooling to the tool and component for excellent surface finish. Sharp 3000 is recommended for medium to heavy duty applications.

The product readily dilutes in all water qualities to form a fine, low odour, milky white emulsion, which resists demulsification and separates tram oils. 

Features

• Very good rust prevention on parts after machining

• High Level of Extreme Presssure Additives

• Excellent Cooling Power

• All metal compatibility - Al, Cu, Zn, Fe, Bronze, Mg etc.

• Extended sump life- 6months - 1 year

• Exceptional Resistance to bacterial degradation

• Adapted for a wide range of machine feeds & speeds

• Fewer nicks & wearability on tools

• Lower Operational temperatures

Coolant Management

Dilution: Do not add just water and then the cutting oil to the tank. Rather make a mixture separately in a barrel for the required concentration and mix throughougly. Then add this mixture to the machine coolant tank. Use a hand refractrometer to constantly measure the concentration and record regularly on the machine.

Tramp Oils arise from positive loss lubricators, oily stock, hydraulics, etc. If allowed to build up in the system, tramp oils are the most frequent cause of performance loss. Their presence leads to bacterial degradation, deemulsification, souring (pH drop) corrosion and poor finishes. On machines standing idle, anaerobic spoilage can be prevented by re-circulating the coolant a few hours twice weekly. Staff will be pleased to provide onsite technical advice and training on your specific coolant requirements. 

Physical, Chemical & Corrosion Prevention Properties

Properties  Test Method   Value
Colour  Visual  Amber Clear 
Viscosity @ cSt @ 40°C   ASTM D 445 45-55 cSt 
Specific Gravity  ASTM D 1298   0.85 - 0.96
Corrosion performance   ASTM 4627-86 Pass(5%solution) 
Colour of Emulsion@5%conc. Inwater    Milky White 
Refractrometer reading@5%conc     5
Odour     None
Concentration   

3-5% depending upon

severity of operation 
pH@5%in1000 ppmwater    8.5-9.5 

Packaging Available

26 Liters Can & 210 Liters Barrel 

Safety Information 

RUST-X Products do not contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated di-phenylether complying with the restricted substances.

Use of safety equipment such as gloves, goggles is recommended. Don’t inhale vapours.

RUST-X Products are also REACH Compliant for exports to the European Union.