Aluminium Semi Synthetic Cutting Oil –Alucut 3000 Product Description Alucut 3000 is a high performance water-mix, aluminium cutting fluid uniquely formulated to give a long predictable sump life. Alucut 3000 provides exceptional performance in medium and severe cutting operations when machining aluminium and its alloys whilst promoting optimum surface finish. Alucut 3000 can also be used to machine other non ferrous metals, for example, copper and it’s alloys and all the most difficult to machine ferrous metals. Special semi synthetic cutting oil for Aluminum with balanced pH value. Ideal for hi speed aluminum machining and grinding. Application Method • Arduous cutting operations on Aluminium and it’s alloys • Machining other non ferrous metals such as Copper and it’s alloys • All the most difficult to machine ferrous metals Features • Prevents built-up edge on tooling • Extends tool life • Promotes excellent surface finish • Does not stain most aerospace and industrial alloys • Provides excellent residual corrosion protection • Provides resistance to bacterial degradation • Provides a long and predictable sump life • Rejects tramp oil Storage and Shelf Life Store in indoor dry conditions between 5°C and 50°C, keep away from sources of heat and naked flames. When stored in original sealed containers, the minimum shelf life is four (4) years. Physical & Chemical Properties Properties Test Method Value Colour Visual Amber Clear Viscosity @ cSt @ 40°C ASTM D 445 18 cSt Specific Gravity ASTM D 1298 0.940 Odour Mild pH value 9.0 - 20.1 Tank Life Upto 6 months Emulsion Colour Milky White Refractometer Calibration Dilution ratio 15.1 20.1 25.1 Refractometer reading 6.3 4 5 Directions for use Recommended dilution: Alucut 3000 should be used between 15:1 and 25:1 depending on severity of the operation, workpiece material and water hardness. To ensure dilution accuracy, it is preferable to use a Venturi Fluid Mixer. For manual mixing, add the concentrate to water at the recommended dilution ratio, stirring continuously. It is advisable to use RustX Alucut 3000 at fluid changeovers. Optimum fluid life is obtained by adequate initial machine cleaning, correct dilution control and regular maintenance of the fluid. Packaging Available 26 Liters Can & 210 Liters Barrel Safety Information & Declaration RUST-X Industrial Oils donot contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominateddi-phenylether complying with the restricted substances. RUST-X Products are also REACH Compliant for exports to the European Union.